What is SikaTop® Armatec®-110 EpoCem®?
SikaTop® Armatec®-110 EpoCem® is a three-component coating material consisting of Portland cement, epoxy resin, selected aggregates, and additives, including corrosion inhibitors. It is used as both a bonding primer between existing concrete and new repair materials and a corrosion protection coating for reinforcing steel. The product complies with the requirements of EN 1504-7.
SikaTop® Armatec®-110 EpoCem Main Applications
This product is suitable for applications such as:
Corrosion protection of reinforcing steel in concrete repair applications
Bonding agent between existing concrete or mortar substrates and new repair materials
Use in concrete repair systems in accordance with EN 1504-9, Principle 11, Method 11.1
SikaTop® Armatec®-110 EpoCem Product Features
The key features specified in the product documentation include EpoCem® technology, which enhances bonding performance, a relatively long working time for applying repair mortars, compatibility with various Sika MonoTop® repair mortars, excellent adhesion to both concrete and steel, corrosion inhibitors, resistance to water and chloride penetration, high shear strength, a relatively long pot life, and the ability to be applied by brush or spray equipment.
Product Information
Composition
Consists of:
Portland cement
Epoxy resin
Graded aggregates
Additives
Packaging
20 kg set consisting of:
Component A = 1.14 kg
Component B = 2.86 kg
Component C = 16 kg
Consumption
As Reinforcement Corrosion Protection
Approximately 2 kg/m² per coat
At a thickness of approximately 1 mm per coat
A minimum of 2 coats is required, with a total thickness of approximately 2 mm.
As a Bonding Primer
Approximately more than 1.5–2.0 kg/m²/mm
Actual consumption depends on the substrate condition.
