Special dry-shake floor hardener for enhancing the strength of concrete surfaces.

Sikafloor®-3 QuartzTop is a ready-to-use, single-component dry-shake floor hardener designed to increase the surface strength of concrete. It consists of a blend of cement, specially graded aggregates, admixtures, and pigments.

Sikafloor®-305 W ESD is a water-based, matte-finish polyurethane topcoat designed for ESD (electrostatic discharge) flooring. It is suitable for environments that require static control, such as electronics manufacturing plants, production rooms, or other ESD-controlled areas. Key features include low VOC content, low odor, UV resistance (with high resistance to yellowing), ease of cleaning, and compliance with standard electrostatic control requirements. The application rate is approximately 0.18–0.20 kg/m² per coat, and the product must be diluted with 10% water prior to use.

Sikafloor®-324 TH is a two-component, tough-elastic polyurethane flooring system designed for concrete surfaces that require both durability and flexibility. It can be applied as either a self-smoothing or slip-resistant finish. Key features include high elongation (approximately 60%), excellent wear and chemical resistance, and ease of maintenance. It is ideal for industrial flooring applications that require a seamless surface with a degree of crack-bridging capability.

Sikagard®-7000 CR is a concrete protection system. that uses Xolutec® technology and is designed to Protect aquatic infrastructure affected by chemical attack and/or degradation from biological sulfuric acid.

Sikagard 710 W is a single-component, water-based waterproofing impregnating agent designed for concrete, cementitious render, brick, fiber cement, and natural stone. It penetrates the pores of the substrate without forming a surface film, effectively reducing water absorption, salt efflorescence, dirt accumulation, mold growth, and the ingress of chloride ions, while still allowing the substrate to breathe (permitting water vapor to escape). It is ideal for protecting building surfaces and concrete structures that require long-term durability.

Ultra-fine epoxy-cement and temporary moisture barrier

Sikagard®-75 EpoCem® is a three-component, epoxy-modified cementitious grout and leveling compound, suitable for use on most mineral-based substrates. Its specially balanced formulation ensures that the properties of cement hydration are complemented and enhanced by the epoxy resin component.

Two-component epoxy coating for surface protection

Sikagard®-62 is a two-component, pigmented, high-build, and rigid epoxy resin coating.

This is a lightweight planting tray designed for Blue-Green Roof systems. It serves multiple functions: retaining water, slowing down runoff, and facilitating drainage within the green roof system. Manufactured from recycled polypropylene (PP), the tray is divided into three primary sections: a planting layer, a water-storage zone for plants, and a layer designed to slow down rainwater runoff.

This is a prefabricated, polymer-modified bitumen waterproofing membrane with a thickness of 5.0 mm. It is reinforced with a non-woven polyester fabric core. The top surface is covered with mineral granules to provide protection against UV radiation, while the underside features a heat-fusible film, allowing for installation via torch-on application.

This is a three-component coating material consisting of Portland cement, epoxy resin, selected aggregates, additives, and a corrosion inhibitor. It serves both as a bonding agent between existing concrete and new repair materials, and as a protective coating against the corrosion of steel reinforcement. The product complies with the specified requirements.

Triflex SmartTec is a liquid-applied waterproofing resin characterized by its low odor, solvent-free and isocyanate-free composition, high elasticity, and resistance to UV radiation, chemicals, and mechanical stress. It can be applied at temperatures ranging from +5°C to +40°C. When used in conjunction with a reinforcement fleece, the application rate must be at least 3.00 kg/m². The product has a pot life of approximately 60 minutes and reaches full cure in about 2 days.