Showing 97–108 of 287 results
Polyurethane Joint Sealant
LANKO® 603 Polyurethane is a single-component, ready-to-use polyurethane joint sealant.
Acrylic-based Joint Sealant
LANKO® 612 Acrylic is a single-component, acrylic-based joint sealant.
High-Strength Non-Shrink Grout for General Applications
Lanko 701 Clavex is a ready-to-use, non-shrink, free-flowing cementitious grout. It is designed for filling joints and voids, as well as for grouting under base plates, offering exceptionally high compressive strength.
Fiber-Reinforced Repair Mortar
A pre-mixed cementitious mortar designed for repairing structural damage.
Fiber-reinforced repair mortar for general patching and repair work.
LANKO® 732 Facade Repair is a pre-mixed mortar designed for repairing small cracks on concrete surfaces.
Concrete Bonding Agent
LANKO® 751 Latex is a synthetic rubber emulsion-based concrete bonding agent. When mixed with cement mortar or concrete, it enhances their properties and increases adhesion strength.
Fiberglass Mesh Reinforcement for Liquid-Applied Waterproofing Systems and Coatings
LANKO® Glass Fiber Mesh is a fiberglass mesh designed to reinforce liquid-applied waterproofing systems. It strengthens various types of liquid membranes—such as acrylic copolymers, polyurethanes, and bituminous coatings—in areas subject to foot traffic, and enhances the performance of flexible waterproofing mortars. LANKO® Glass Fiber Mesh is also used in conjunction with skim coats to bridge cracks and reinforce joints between different materials.
Loft-Style Decorative Wall Plaster
LANKO® Loft is a pre-mixed cement-based product designed for use with LANKO LOFT WAX. It is applied to walls to create a beautiful, decorative finish in a loft style.
Mapecoat TNS Base Coat Binder [NA] is a fast-drying acrylic latex base coat designed for surface preparation within the Mapecoat TNS sports flooring system. Suitable for both indoor and outdoor use, it can be applied to asphalt surfaces, concrete surfaces (pre-treated with Mapecoat TNS Primer EPW), and existing acrylic or polyurethane flooring systems that have been properly prepared. It helps conceal minor surface imperfections, enhances adhesion, and creates a flexible base layer prior to the application of subsequent Mapecoat TNS products. The binder can be mixed with sand to suit specific court surface conditions. It dries quickly—typically within 2–3 hours—and is ideal for sports flooring projects that require both durability and comfort.
Mapecoat TNS White Base Coat is a water-based acrylic resin base coat and filler, formulated with specially graded quartz sand. It is designed for surface preparation within the Mapecoat TNS multi-layer sports flooring system. It is suitable for new sports surfaces—whether on bituminous or cementitious substrates—as well as for existing acrylic or polyurethane sports surfaces. It helps to level the surface, fills shallow depressions up to 3 mm deep, and reduces the amount of material required for subsequent layers. It should be applied using a rubber or metal squeegee in 1–2 coats, with a consumption rate of approximately 0.4–1.2 kg/m² per coat, depending on the porosity of the substrate. It dries within approximately 12–24 hours under standard environmental conditions.
Mapecoat TNS Base Color is a water-based, pigmented acrylic resin coating designed as an intermediate layer for the Mapecoat TNS multi-layer sports flooring system. It is suitable for both new sports surfaces and the refurbishment of existing acrylic or polyurethane-based sports surfaces—such as those for tennis, basketball, volleyball, futsal, or multi-purpose sports—serving to prepare the substrate before the application of the final topcoat. It is applied using a rubber or metal squeegee/trowel, with a consumption rate of approximately 0.4–0.5 kg/m². The product dries within 12–24 hours, depending on on-site weather conditions.