Showing 85–96 of 158 results
Fosroc Nitoproof 800 is a liquid-applied polyurethane waterproofing and crack-bridging system for both new and existing structures.
Nitoproof RS is a brush-applied roof coating designed for both new and existing roofs made from common roofing materials—such as concrete, fiber cement, corrugated sheets, waterproofing membranes, and timber (excluding bitumen). Highly durable yet exceptionally flexible, Nitoproof RS—when reinforced with Fosroc Scrim 2250—provides comprehensive protection for the roof.
Nitowrap CW is a high-strength carbon fiber fabric system designed for strengthening concrete structures. Used in conjunction with an epoxy resin, it enhances the load-bearing capacity of a structure—specifically by increasing its flexural and shear strength. Furthermore, the lightweight nature of the fabric allows it to be easily applied to the corners and curved sections of a structure.
Nitowrap Encapsulation Resin & Primer is a high-strength epoxy resin system designed for structural strengthening. It is used in conjunction with reinforcement fabrics within the Nitowrap system to enhance load-bearing capacity—specifically regarding flexural and shear strength—and ensures full contact between the reinforcement fabric and the structural surface.
A pre-applied waterproofing membrane that bonds firmly to poured concrete, designed for use under foundation slabs and on cast-in-place underground walls in confined spaces where single-sided formwork is required.
Preprufe 300R & 160R are pre-applied waterproofing membranes that bond firmly to poured concrete, designed for use beneath floor slabs or against the exterior of below-grade walls in confined spaces.
Preprufe 300S is a pre-applied waterproofing membrane that bonds firmly to poured concrete; it is designed for use beneath floor slabs or against the back of below-grade walls in confined spaces.
Proofex 12 is a cold-applied, self-adhesive membrane consisting of a polymer-modified bitumen layer, internally reinforced with polyester and bonded to an outer polyethylene film.
Proofex Engage is a pre-applied membrane that automatically bonds to the poured concrete.
Proofex GP is a cold-applied self-adhesive membrane consisting of an internally reinforced polymer-modified bitumen layer bonded to an outer polyethylene film.
TPO/FPA (Flexible Polypropylene Alloy) reinforced membranes are produced by extruding pellets obtained by incorporating ethylene-propylene rubber into a polypropylene matrix, along with other additives as appropriate for the specific type of membrane.