Nitocote CM210 Product Description
Nitocote CM210 is a cementitious coating used for waterproofing water-retaining structures and structures where water drainage is not possible.
Nitocote CM210 is a waterproofing coating suitable for use in water storage tanks, reservoirs, canals, and drainage channels.
The material can be applied to concrete, brickwork, and blockwork substrates. It is suitable for retaining walls and underground foundation structures, as well as construction joints to maintain waterproofing continuity as part of a waterproofing solution complying with BS 8102:2009.
Applications (Use)
Nitocote CM210 is a cementitious elastomeric waterproofing coating with inherent crack-bridging properties. It is suitable for the following general applications:
Potable water-retaining structures
Structures requiring protection against potable water penetration
Internal basement waterproofing
Drainage culverts
Product Advantages (Advantages)
Withstands high hydrostatic pressure, including both positive and negative water pressure
Excellent crack-bridging capability, both before and after water immersion
Approved for contact with potable water
Excellent adhesion to concrete and masonry substrates
Long working life after mixing
Easy to apply using a brush, trowel, or spray equipment
Can bond to green concrete or damp concrete substrates
Standards Compliance (Standards Compliance)
Nitocote CM210 complies with the requirements of the following standards:
BS 6920:1990 – Standard for assessing the effects of materials on water quality (Effect on Water Quality)
Water Byelaws Scheme – Approved under Product Registration Number 9509517
DIN 1048 – Water Penetration Test
BS 476:1987 Parts 6 and 7 – Tested for fire performance in accordance with these standards
Product Description (Description)
Nitocote CM210 is a two-component, polymer-modified cementitious waterproofing coating supplied in factory-prepackaged kits.
The product is designed for easy on-site mixing using a slow-speed drill fitted with a mixing paddle. Once thoroughly mixed, the material can be applied to the substrate using a brush, trowel, or spray equipment.
The product can also be applied using a roller. However, trowel finishing is recommended to achieve the best surface finish.
Nitocote CM210 is available in grey and white. Once fully cured, the material forms a highly flexible elastomeric waterproofing membrane that is impermeable to water, effectively preventing water penetration.
