Conbextra EP300 Product Description
Conbextra EP300 is an epoxy resin-based product designed for free-flowing grouting of gaps ranging from approximately 10–300 mm at ambient temperatures up to 55°C.
The three-component Conbextra EP300 system consists of a base resin, a liquid hardener, and specially graded inert fillers. The components are supplied in the correct mixing proportions and are designed for mixing complete packs on-site. No additional materials should be added.
Uses
Suitable for applications involving heavy loads, dynamic loads, or mobile loads, particularly where extended working time and/or large-volume grouting is required.
Grouting beneath reciprocating or rotating machinery
Installation of heavily loaded crane rails and transportation rails
Grouting beneath high-speed turbines and centrifuges
Long-distance grouting applications and/or applications requiring thick grout sections
All types of applications carried out under high ambient temperature conditions
Suitable for applications in the oil and gas industry, as well as the water industry
Suitable for grouting beneath pumps and reciprocating machinery
Advantages
Low creep under sustained loads over extended periods
Resistant to repetitive dynamic loads
Non-shrink, ensuring full contact with the supporting substrate and good adhesion
High compressive, tensile, and flexural strength
Resistant to a wide range of chemicals
Description
Conbextra EP300 is a low-exotherm grouting material, ideally suited for applications requiring extended working time, filling large gaps with thicknesses up to 300 mm, or grouting under ambient temperatures up to 55°C.
Conbextra EP300 is a three-component grouting system consisting of a Base Resin, a Liquid Hardener, and Specially Graded Inert Fillers.
