Nitoflor TF5000 Product Description
Nitoflor TF5000 is a trowel-applied, chemically resistant floor screed installed at a nominal thickness of 5 mm. This specified thickness provides an impermeable surface with high chemical resistance, achieved through the careful selection of amine curing agents and high-quality graded silica sands. The system consists of Nitoprime Primer, a two-component epoxy resin primer, and Nitoflor TF5000. Both products are supplied in factory pre-weighed units, ready for on-site mixing and application.
Applications (Uses)
Nitoflor TF5000 is designed as a 5 mm thick industrial floor screed system suitable for environments requiring high resistance to mechanical stresses and chemical attack.
Typical application areas include power stations, chemical manufacturing plants, factory traffic areas, and food processing facilities.
For areas requiring high standards of hygiene, Nitoflor TF5000 can be sealed with Nitoflor FC130 or Nitoflor FC140 epoxy resin floor coating systems.
Product Advantages (Advantages)
Durable – Provides long-term surface protection and is suitable for heavy industrial environments
Improves Efficiency – The seamless, continuous surface facilitates traffic movement and cleaning
Good Resistance – Resistant to a wide range of industrial chemicals
Tough – Provides high resistance to impact and point loading
Non-Taint – Can be installed in areas adjacent to uncovered food without causing odor contamination
Standards Compliance (Standards Compliance)
Nitoflor TF5000 and Nitoprime 31 have been evaluated by the Leatherhead Food Research Association in the United Kingdom to assess their potential to cause odor or taste contamination of food during installation.
The test results confirmed that the products present a very low risk of causing odor or taste contamination of food, both when the materials are wet and after they have dried.
Further information is available in Food Research Association Report No. P3300.
Product Description (Description)
Nitoflor TF5000 consists of graded sands bound together with a pigmented epoxy resin binder.
The product is supplied as a four-component system, with all components factory pre-weighed in the correct proportions, ready for on-site mixing and application.
Once installed, Nitoflor TF5000 provides a matt finish with a slightly textured, anti-slip surface.
Nitoflor TF5000 is available in a variety of standard colors.
Technical Support (Technical Support)
Fosroc provides comprehensive technical support services, including guidance during the design stage, application advice, and on-site problem-solving assistance.
Specifiers and contractors can contact Fosroc’s trained technical team for advice and answers to their inquiries.
