Product Description
Sikagard®-63 N is a two-component protective coating based on epoxy novolac resin. It provides excellent chemical resistance and is suitable for various structures and substrates, including mineral surfaces, cementitious materials, and resin-based surfaces. Its high chemical resistance helps protect surfaces against aggressive chemicals that may cause rapid deterioration.
Applications
Sikagard®-63 N should only be applied by trained and experienced professionals.
Used as a chemical-resistant protective coating for:
Concrete
Stone
Cement mortar
Plaster and render
Epoxy cement
Epoxy resin-based products
Steel
Used as a chemical-resistant protective lining for:
Silos
Walls of storage tanks and containment basins
Chemical mixing tanks
Chemical storage tanks
Fuel and oil storage tanks
Sludge tanks
Industrial plant areas exposed to chemicals
Used as a corrosion-resistant protective coating for steel components in:
Food processing plants
Wastewater treatment plants
Chemical and pharmaceutical manufacturing plants
Features / Advantages
High chemical resistance
Good temperature resistance
Low VOC emissions
High mechanical strength
Impermeable to liquids
Easy to mix
Can be applied by brush, roller, or airless spray equipment
Mixing Method
Stir Part A separately until the pigments are uniformly dispersed and the color is consistent.
Add Part B to Part A.
Mix continuously for approximately 3 minutes.
Transfer the mixture into another clean container.
Continue mixing for at least 1 minute.
Scrape the sides and bottom of the container thoroughly.
Mix the entire set; do not divide it into smaller portions.
The total mixing time for Components A+B is approximately 4 minutes. Avoid overmixing to minimize air entrapment. Sikagard-63N-en-MY-03-2026-4-1
Application Method
The product can be applied using:
Roller
Brush
Airless Spray
Apply at least 2 coats, ensuring that the specified waiting time is observed before applying the next coat.
